You are not logged in.
Front Art
Pages: 1 2
Topic closed
- Forum
- » 3D Modelling/Sculpting Challenge
- » 3D Modelling Challenge #1 - Speed Sculpting Creature Head
#1 2009-02-11 22:39:51
- ADMIN
- Administrator
- Registered: 2009-01-15
- Posts: 336
3D Modelling Challenge #1 - Speed Sculpting Creature Head
ICG 3D Modelling Challenge #1 - Speed Sculpting Creature Head
Session kali ini peserta diminta mensculpting kepala creatures (monster, etc) Hanya kepala, tidak perlu membuat tubuhnya, tidak perlu diberi texture, diperbolehkan print screen dari zbrush.
Idea by : bin
Deadline 7th March 2009 ; 24:00 WIB
MODELING :
- Time Limit : 5 hours
- Polycount : Free.
- No modification from free downloaded model on internet.
- Lighting, render are not included in time limit, but will help in final presentation.
POSTING RULES:
- Give brief explanation on how you finish your model.
- Don't forget to attach (in 1 image):
* Name/Username.
* Accomplished time/ waktu pengerjaan.
* Software used.
* Unsmooth wireframe.
- Users can post more than 1 artwork but different model.
- Artwork size max 800x600 pixels
- Dipersilahkan membahas teknik modeling.
MISC:
- Software bebas, diperbolehkan membuat low polynya di 3d software dahulu sebelum dibawa ke software sculpting, seperti zbrush atau mudbox.
- Speed modelling challenge is open to any ICG members.
- Akan ada 3 pemenang, yang dipilih (vote) dari para member.
- The Best Three akan mendapatkan badges award.
- No cheating. Speed modelling ini lebih ditujukan utk
latihan pemecahan logika kita dalam kasus suatu modelling dan jg utk meramaikan aktifitas di ICG.
- Pertanyaan yang jawabannya sudah ada di rule tidak akan DIRESPON.
- Confuse? PM moderator speedmodelling : ADMIN
Offline
#2 2009-02-11 23:03:39
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
i'm in for sure, hehehehehehe
Offline
#3 2009-02-12 01:25:38
- prieMAX
- Member
- Registered: 2009-02-12
- Posts: 3
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
mau nanya... apa boleh ngambil contoh dari art milik org lain sebagai model sculpt kita..?
misal ada situs gambar/concept art kepala naga nya bagus..trus kita jadiin 3d model sculpt kita...apakah d perkenankan?
ato emang harus ide nya dari art sampai finishing model sculpt nya harus milik sendiri?
thks
Offline
#4 2009-02-12 01:28:19
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
hmmmm, pertanyaan bagus tuh...... tapi gw rasa sih gpp yah, since ini kan cuma speed modeling, tapi harus ati2 jg dengan policy dari artist tersebut, jgn mpe di sue aja, hehehehehe............
Offline
#5 2009-02-12 01:36:57
- ADMIN
- Administrator
- Registered: 2009-01-15
- Posts: 336
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
@prieMAX : ya, diperbolehkan 
p.s : postingan pertanyaan licara meygie kami delete karena bertanya tidak pada tempatnya...
Offline
#6 2009-02-12 02:27:18
- esa sangkala
- real membler
- Registered: 2009-02-05
- Posts: 70
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
start.. setuju dengan konsepnya.. moga2 selesai jam setengah sepuluh nanti.. (wkt indonesia barat).
ato jam stengah 8 wkt icg
Last edited by esa sangkala (2009-02-12 02:28:30)
Offline
#7 2009-02-12 05:40:11
- Asparagus88
- Junker Wannabe
- Registered: 2009-02-04
- Posts: 386
- Website
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
hehe maret ya? i'm in..itung2 belajar ngesculpt :D..
oh ya wipnya digabung di satu thread atau bikin thread sendiri2?
Offline
#8 2009-02-12 06:38:36
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
lho speed modeling emang pake WIP juga yah? lha kalo sclupting cuma 1 jam jadi?
Offline
#9 2009-02-12 06:48:25
- Asparagus88
- Junker Wannabe
- Registered: 2009-02-04
- Posts: 386
- Website
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
@kauwan: halah,,baru nyadar gw pertanyaan bodong emang :lol: ... abis ingetnya ama rules mini challenge disebelah sih :lol:....
Offline
#10 2009-02-12 08:36:33
- esa sangkala
- real membler
- Registered: 2009-02-05
- Posts: 70
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
akhirnya bisa upload juga..
posting pertamax.. yang lain menyusul..
ternyata 5 jam sangat cepat..
Last edited by esa sangkala (2009-02-13 09:01:23)
Offline
#11 2009-02-12 08:58:46
- Philip Vampire
- Bajingz Bersayap
- From: Bran Castle-Transylvania
- Registered: 2009-01-13
- Posts: 763
- Website
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
niall wrote:
i'm in for sure, hehehehehehe
I'm in too nil hehe.... :P
si hery bajingz bilang juga mau ikutan tuh nil.... we'll see who is the most bajingz....
the bajingz of the bajingz.....
Offline
#12 2009-02-12 11:02:29
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
ini punya saya,. bikinnya pake Zsphere di zbrush :D
Offline
#13 2009-02-12 20:12:48
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
saya ikutan
sclupting pake sphare di zbrush 3.1
Offline
#14 2009-02-12 23:18:48
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
Philip Vampire wrote:
niall wrote:
i'm in for sure, hehehehehehe
I'm in too nil hehe.... :P
si hery bajingz bilang juga mau ikutan tuh nil.... we'll see who is the most bajingz....
the bajingz of the bajingz.....
YESSSSHHHHH........ WE SHALL SEE.......... MUAHAHAHAHAHAHAHAHAHAHAAHA........ uhukkk..... uhukkkkk.......
ONE BAJING TO RULE THEM ALL...........
Offline
#15 2009-02-13 09:04:59
- esa sangkala
- real membler
- Registered: 2009-02-05
- Posts: 70
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
akhirnya bisa diuplod juga.. heheehhehehe... ikutan lagi ah..
Offline
#16 2009-02-13 09:07:18
- daniariandhanu
- Member
- Registered: 2009-02-05
- Posts: 35
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
esa sangkala : mas sedikit aneh kupingnya mirip dengan kuping manusia mas palanya si keren bgt
Offline
#18 2009-02-14 03:57:27
- reanimate
- -('3')_| *plak....
- From: Surabaya
- Registered: 2009-02-13
- Posts: 19
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
ikut ah.
Pake 3dsmax untuk base mesh dan Z-brush untuk detailing. selesai dalam 3 jam. klo tambah teksturing jadi 4 jam -_-".
It's not about how you do it, but will you do it?
Offline
#19 2009-02-14 07:42:30
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
nambah satu lagi ah
base modeling pake zsphare 
Offline
#20 2009-02-14 12:06:50
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
ini satu lagi dari saya,. bikinnya juga dari zsphere di zbrush,. modelingnya sebenarnya cuma sejam,. tapi ditambah bikin detail bulu dan colornya jadi 4 jam T_T fiuh...
Offline
#21 2009-02-15 06:05:45
- Vick-SnakeEyes
- - Snake Family -
- From: Snake Cave
- Registered: 2009-02-05
- Posts: 64
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
im in too...
will start tomorrow ...
Offline
#22 2009-02-15 07:40:46
- fractalife
- Nubitol
- From: Malang - Batam
- Registered: 2009-02-12
- Posts: 346
- Website
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
Bikin d Zbrush. waktu 3 jam setengah. ( maaf unsmooth polygon gk disertain, lupa, soalnya udah ampe warnet, nanggung klo mo pulang ambil file, gmn nih?) 
www.fractalifeworks.blogspot.com diharapkan sudi menyambangi blog saya yang nubie
Offline
#23 2009-02-15 07:45:55
- fractalife
- Nubitol
- From: Malang - Batam
- Registered: 2009-02-12
- Posts: 346
- Website
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
kasus sama, terlanjur di warnet, software zbrush3.1
www.fractalifeworks.blogspot.com diharapkan sudi menyambangi blog saya yang nubie
Offline
#24 2009-02-15 17:17:20
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
Kl emang di warnet
nanti kalo di warnet lagi tolong diupdate ya, ikutin format yang udah dikasih.
thanks.
Offline
#25 2009-02-15 21:26:42
- Bagoes
- Member
- Registered: 2009-02-09
- Posts: 5
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
Buat Kepala Naga
menggunakan Zbrush 3.1
Modeling use Zsphere : 40 menit
Sculpting n painting : 95 menit
Total :2 Jam 15 menit
Last edited by Bagoes (2009-02-16 02:43:45)
Offline
#26 2009-02-17 12:55:19
- full metal husband
- Member
- Registered: 2009-02-14
- Posts: 12
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
blajar sculpting pake zbrush
masih banyak kurangnya, blum ditambah wrinkle2 kecil, masi simetri, banyak bentuk yg aneh, tp diangggap selese aja, ngantuk
bigger view click here
http://i58.photobucket.com/albums/g271/ … igmon2.jpg
Last edited by full metal husband (2009-02-17 13:03:17)
Offline
#27 2009-02-17 18:01:39
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
Hi guys, ini yg dari gw........
di buat selama 4 jam........
masih bisa di tambahin detil sih, cuma ntar aja........... mo ngejer yg laen :P
upss lupa nulis software yg di pake, yg ini pake max dan zbrush
Offline
#28 2009-02-18 20:11:48
- henryzjetsam
- Administrator
- From: medan city
- Registered: 2009-01-18
- Posts: 497
- Website
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
ehh..reanimate leo bs nge zzzz ya. keren2. punya si fracta sangar. oi nial punya lu mukanya stylize banget. mwahahhaha. good job man!
"Here on earth you will have many trials and sorrows. But take heart, because I have overcome the world.” John 16:33b
Offline
#29 2009-02-19 08:35:09
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
nial goblinnya kek beavis n butthead :P
tes tes dulu.. ( pgn bikin naga tapi blon ada mood )
Kill one man, you're a murderer. Kill many, you're a conqueror. Kill them all, you're mahou shoujo!
Offline
#30 2009-02-19 18:33:02
Re: 3D Modelling Challenge #1 - Speed Sculpting Creature Head
wakakakkaka bin, bener jg yah omongan lo.... hehehehehe mungkin gara2 matanya kali ye. hahahahaha
Offline
Topic closed
Pages: 1 2
- Forum
- » 3D Modelling/Sculpting Challenge
- » 3D Modelling Challenge #1 - Speed Sculpting Creature Head
Board footer
© Copyright 2003–2009 IndoCG.com